How to show Wifi password using cmd?

How to Show WiFi Password Using CMD

Step 1: Connect to WiFi Network

Before we can show the WiFi password using CMD, we need to connect to the WiFi network. Here’s how to do it:

• Open the Command Prompt (Windows) or Terminal (macOS/Linux) on your computer.
• Type the following command to connect to the WiFi network:

  • netsh wlan show networks
  • This command will display a list of available WiFi networks.
  • Select the network you want to connect to by typing its name.
  • Type the following command to connect to the selected network:

    • netsh wlan connect name=<network_name>

Step 2: Show WiFi Password

Once you’re connected to the WiFi network, you can show the password using CMD. Here’s how to do it:

• Type the following command to show the WiFi password:

  • netsh wlan show key
  • This command will display the WiFi password.
  • If you’re using a WPA2 password, you may need to use the following command to show the password:

    • netsh wlan show key profile=All
    • This command will display the WiFi password for all profiles.

Step 3: Show WiFi Network Name

You can also show the WiFi network name using CMD. Here’s how to do it:

• Type the following command to show the WiFi network name:

  • netsh wlan show networks
  • This command will display a list of available WiFi networks.
  • Select the network you want to show the name for by typing its name.
  • Type the following command to show the network name:

    • netsh wlan show networks name=<network_name>

Step 4: Show WiFi Network Description

You can also show the WiFi network description using CMD. Here’s how to do it:

• Type the following command to show the WiFi network description:

  • netsh wlan show networks
  • This command will display a list of available WiFi networks.
  • Select the network you want to show the description for by typing its name.
  • Type the following command to show the network description:

    • netsh wlan show networks description=<network_name>

Step 5: Show WiFi Network SSID

You can also show the WiFi network SSID (Service Set Identifier) using CMD. Here’s how to do it:

• Type the following command to show the WiFi network SSID:

  • netsh wlan show networks
  • This command will display a list of available WiFi networks.
  • Select the network you want to show the SSID for by typing its name.
  • Type the following command to show the SSID:

    • netsh wlan show networks ssid=<SSID>

Tips and Tricks

• Make sure you’re connected to the correct WiFi network before trying to show the password.
• If you’re using a WPA2 password, you may need to use the netsh wlan show key profile=All command to show the password.
• You can also use the netsh wlan show profiles command to show all profiles on your computer.
• If you’re having trouble showing the password, try restarting your computer or checking your network settings.

Conclusion

Showing the WiFi password using CMD is a simple process that can be done using the netsh wlan show key command. By following these steps, you can easily show the WiFi password and network name, description, and SSID. Remember to always be careful when showing sensitive information, and make sure you’re connected to the correct network before attempting to show the password.