How to make bootable pendrive for Windows 10?

Creating a Bootable Pendrive for Windows 10: A Step-by-Step Guide

Introduction

Creating a bootable pendrive for Windows 10 is a simple and effective way to transfer files, install software, or even create a backup of your operating system. With a few basic steps, you can create a bootable pendrive that will allow you to access your Windows 10 installation from any computer. In this article, we will guide you through the process of creating a bootable pendrive for Windows 10.

Preparation is Key

Before you start creating a bootable pendrive, make sure you have the following:

A pendrive with at least 4GB of free space

A computer with a compatible operating system (Windows 10)

A USB cable

A computer with a compatible operating system (Windows 10)

Step 1: Download the Pendrive Creator

To create a bootable pendrive, you will need to download the Pendrive Creator software. You can download the software from the official website of the manufacturer, Pendrivesoft. The software is available for Windows and macOS.

Step 2: Install the Pendrive Creator

Once you have downloaded the Pendrive Creator software, install it on your computer. Follow the installation instructions to complete the installation process.

Step 3: Create a Bootable Pendrive

To create a bootable pendrive, follow these steps:

Launch the Pendrive Creator software

Click on the "Create Pendrive" button

Select the pendrive you want to create as the bootable device

Choose the operating system you want to install (Windows 10 in this case)

Select the language and other options as desired

Click on the "Create Pendrive" button

Step 4: Format the Pendrive

Before you can install Windows 10 on the pendrive, you need to format it. To do this, follow these steps:

Insert the pendrive into your computer

Press the F2 key to open the Command Prompt

Type the following command and press Enter: diskpart /s:

Select the pendrive as the device

Type the following command and press Enter: clean

Type the following command and press Enter: format fs=ntfs quick

Type the following command and press Enter: exit

Step 5: Install Windows 10 on the Pendrive

Once the pendrive is formatted, you can install Windows 10 on it. To do this, follow these steps:

Insert the pendrive into your computer

Press the Windows key + X and select Computer (or This PC)

Click on the Create a bootable USB drive option

Select the pendrive as the bootable device

Choose the language and other options as desired

Click on the Create button

Step 6: Boot from the Pendrive

To boot from the pendrive, follow these steps:

Insert the pendrive into your computer

Press the F2 key to open the Command Prompt

Type the following command and press Enter: bootm 4

The pendrive should now boot from the Windows 10 installation

Troubleshooting Tips

If you encounter any issues during the installation process, try restarting your computer and trying again.

If you are using a USB port that is not working, try using a different USB port.

If you are experiencing any issues with the pendrive, try formatting it again and then re-creating the bootable pendrive.

Conclusion

Creating a bootable pendrive for Windows 10 is a simple and effective way to transfer files, install software, or even create a backup of your operating system. By following the steps outlined in this article, you can create a bootable pendrive that will allow you to access your Windows 10 installation from any computer. Remember to always use caution when creating a bootable pendrive, and to follow the manufacturer’s instructions for any software or hardware you are using.

Table of Contents