How to Make Tec 9 Full Auto Cold War: A Step-by-Step Guide
Introduction
The Tec 9 is a semi-automatic pistol designed by Colt’s Manufacturing Company, which has been a staple in the firearms world for decades. However, in the context of the Cold War, the Tec 9 was often referred to as a "full auto" pistol due to its ability to fire multiple rounds in rapid succession. In this article, we will delve into the world of Cold War firearms and provide a step-by-step guide on how to make a Tec 9 full auto.
What is a Full Auto Pistol?
A full auto pistol is a firearm that can fire multiple rounds in rapid succession without the need for manual reloading. This is achieved through the use of a semi-automatic mechanism, which allows the pistol to cycle the action automatically after each shot. Full auto pistols are typically used for military and law enforcement purposes, but they can also be used for civilian purposes.
The Tec 9: A Semi-Automatic Pistol
The Tec 9 is a semi-automatic pistol designed by Colt’s Manufacturing Company in the 1960s. It is chambered in 9x19mm Parabellum and features a 4-inch barrel. The pistol has a 15-round magazine capacity and is equipped with a manual safety.
How to Make a Tec 9 Full Auto
While it is not possible to "make" a Tec 9 full auto in the classical sense, we can provide a step-by-step guide on how to modify a standard Tec 9 to achieve full auto capabilities.
Important Safety Notes
Before attempting to modify your Tec 9 to full auto, please note the following safety precautions:
- Always follow local laws and regulations regarding firearms.
- Wear protective gear, including safety glasses and gloves.
- Make sure you have a solid understanding of firearms safety and handling.
Step 1: Obtain the Necessary Permits and Licenses
To modify your Tec 9 to full auto, you will need to obtain the necessary permits and licenses. In the United States, you will need to obtain a Federal Firearms License (FFL) and a State Firearms License.
Step 2: Obtain the Required Parts
To modify your Tec 9 to full auto, you will need to obtain the following parts:
- A 9x19mm Parabellum barrel (approximately 4 inches long)
- A 9x19mm Parabellum magazine (approximately 15 rounds)
- A full auto trigger group (approximately $500-$1000)
- A full auto firing pin (approximately $100-$300)
- A full auto safety (approximately $50-$100)
Step 3: Install the Full Auto Trigger Group
The full auto trigger group is the most critical component of a full auto pistol. It is responsible for firing the pistol when the trigger is pulled. To install the full auto trigger group, follow these steps:
- Remove the standard trigger group from the Tec 9.
- Install the full auto trigger group, making sure it is properly aligned and secured.
- Test the trigger to ensure it is functioning correctly.
Step 4: Install the Full Auto Firing Pin
The full auto firing pin is responsible for igniting the primer in the cartridge. To install the full auto firing pin, follow these steps:
- Remove the standard firing pin from the Tec 9.
- Install the full auto firing pin, making sure it is properly aligned and secured.
- Test the firing pin to ensure it is functioning correctly.
Step 5: Install the Full Auto Safety
The full auto safety is responsible for preventing the pistol from firing when the trigger is pulled. To install the full auto safety, follow these steps:
- Remove the standard safety from the Tec 9.
- Install the full auto safety, making sure it is properly aligned and secured.
- Test the safety to ensure it is functioning correctly.
Step 6: Test the Full Auto Pistol
Once the full auto trigger group, firing pin, and safety have been installed, you can test the full auto pistol. To do this, follow these steps:
- Load the pistol with 9x19mm Parabellum cartridges.
- Pull the trigger and fire multiple rounds in rapid succession.
- Test the pistol’s accuracy and reliability.
Important Considerations
While modifying a Tec 9 to full auto can be a rewarding experience, there are several important considerations to keep in mind:
- Local Laws and Regulations: Full auto pistols are heavily regulated in the United States. Make sure you have a solid understanding of local laws and regulations regarding firearms.
- Safety Risks: Full auto pistols can be extremely hazardous. Make sure you have a solid understanding of firearms safety and handling.
- Maintenance and Repair: Full auto pistols require regular maintenance and repair. Make sure you have a solid understanding of maintenance and repair procedures.
Conclusion
Modifying a Tec 9 to full auto is a complex and challenging process that requires a solid understanding of firearms safety and handling. While it is possible to make a Tec 9 full auto, it is not a process to be taken lightly. If you are considering modifying a Tec 9 to full auto, please consult with a firearms expert and follow all local laws and regulations.
Additional Resources
If you are interested in learning more about firearms safety and handling, please consult the following resources:
- The National Rifle Association (NRA) website
- The United States Concealed Carry Association (USCCA) website
- The International Association of Law Enforcement Firearms Instructors (IALEFI) website
Disclaimer
The information provided in this article is for educational purposes only and should not be used to modify a Tec 9 to full auto without proper training and experience.