How to Change WiFi Network on Eufy RoboVac
Introduction
The Eufy RoboVac is a popular smart vacuum cleaner that comes with a built-in WiFi adapter, allowing you to control and monitor its operations remotely. However, if you need to change the WiFi network, it can become a challenge. In this article, we will guide you through the process of changing the WiFi network on your Eufy RoboVac.
Prerequisites
Before you begin, make sure that your Eufy RoboVac is connected to the same WiFi network as the router it’s connected to. Also, ensure that the device is running the latest firmware version and that the WiFi adapter is enabled.
Step 1: Restart Your Eufy RoboVac
To change the WiFi network on your Eufy RoboVac, you need to restart the device. Here’s how:
- Locate the small switch located on the bottom of the device.
- Press and hold the switch for 3-5 seconds.
- Release the switch and the device should turn on.
Step 2: Access the WiFi Settings
Once the device is restarted, it will automatically connect to the WiFi network. To access the WiFi settings, follow these steps:
- Use the touch screen or buttons on the device to navigate to the WiFi settings.
- Select the WiFi network from the list of available networks.
- If prompted, enter the WiFi password or network code.
Step 3: Connect to the New WiFi Network
Now that the device is connected to the new WiFi network, you can start monitoring its activities and adjusting the settings as needed.
- To view the device’s Wi-Fi activity, navigate to the Settings tab on the home screen.
- Select the Wi-Fi tab and then the Devices tab.
- Find the Eufy RoboVac device and select it to view its Wi-Fi activity.
Step 4: Configure the WiFi Settings
To change the WiFi network on your Eufy RoboVac, you need to configure the WiFi settings. Here’s how:
- Go to the Settings tab on the home screen.
- Select the Wi-Fi tab and then the Settings button.
- Select Setup and then select Customize.
- Use the touch screen or buttons to enter the new WiFi network name (SSID) and password.
- Click Save to save the changes.
Step 5: Configure the Device Settings
Once the WiFi settings are configured, you can adjust the device settings to optimize its performance. Here’s how:
- Go to the Settings tab on the home screen.
- Select the Device tab.
- Select the Smart Scheduling option and adjust the settings to your liking.
- Select the Scheduled Cleaning option and set the schedule for the device.
Setting up Guest Network
The Eufy RoboVac also allows you to set up a guest network. Here’s how:
- Go to the Settings tab on the home screen.
- Select the Wi-Fi tab and then the Guest tab.
- Select the guest network and enter a name for the guest network.
- Click Save to save the changes.
Troubleshooting Tips
Here are some troubleshooting tips to help you resolve any issues you may encounter:
- Eufy RoboVac Error Messages: If you receive an error message while changing the WiFi network, try restarting the device and then try again.
- Device Not Connecting to WiFi: If the device is not connecting to the WiFi network, try restarting the device and then try again.
- Device Not Connecting to Router: If the device is not connecting to the router, try restarting the router and then try again.
Conclusion
Changing the WiFi network on your Eufy RoboVac is a relatively simple process that can be completed in a few steps. By following these steps and tips, you can ensure that your device is connected to the WiFi network and that it’s optimized for performance.