Linking Sony Subwoofer to Soundbar: A Step-by-Step Guide
Connecting the Power
Before you can link your Sony subwoofer to your soundbar, you need to ensure that the power is flowing to the correct device. Here are the steps to follow:
- Check the power cord of your subwoofer to ensure it is properly plugged into a power outlet. The power cord should be labeled as "Subwoofer" or "PS1".
- Check the power cord of your soundbar to ensure it is properly plugged into a power outlet. The power cord should be labeled as "Soundbar" or "AV Receiver".
- If your soundbar has a separate power button, press it to ensure it is in the "On" position.
Preparing the Subwoofer
- Locate the Subwoofer Output terminal on your Sony subwoofer. This is usually a "1" or "M4" labeled terminal.
- Locate the Subwoofer Output terminal on your soundbar. This is usually a "R-Sub Out" or "Sub Out" labeled terminal.
- Make sure the Subwoofer Output terminal on your soundbar is set to "Passive" or "P". This will prevent the soundbar from overdriving the subwoofer.
Connecting the Subwoofer to the Soundbar
- Use a 10/4mm or 12/4mm connector to connect the Subwoofer Output terminal on your subwoofer to the R-Sub Out or "Sub Out" terminal on your soundbar.
- Passive connection: If your soundbar has a Passive input, simply plug the subwoofer connector into the R-Sub Out terminal. If your soundbar has an Active input, you will need to use an XLR or TRRS cable to connect the subwoofer.
- Check the connection by using a multimeter to verify that the voltage is passing through the Subwoofer Output terminal.
Connecting the Subwoofer to the Source
- Use a RCA or 3.5mm analog audio cable to connect the Subwoofer Output terminal on your subwoofer to your TV’s Subwoofer Out or "R-Law" input.
- Analog connection: Connect the Subwoofer Output terminal on your subwoofer to your TV’s Subwoofer Out or "R-Law" input using an RCA or 3.5mm analog audio cable.
- Digital connection: Connect the Subwoofer Output terminal on your subwoofer to your TV’s Digital Output or "S-PCM" input using an RCA or 3.5mm analog audio cable.
Tips and Considerations
- Make sure the Subwoofer Output terminal on your soundbar is not damaged or corroded, as this can prevent the connection from being made.
- If your soundbar has a Dual Driver configuration, make sure the Subwoofer Output terminal on your subwoofer is set to "Dual" or "2".
- If your soundbar has a Built-in Subwoofer Amplifier, make sure the Subwoofer Output terminal on your subwoofer is set to "High" or "S-PCM".
- If you are using a surround sound system, you may need to connect the Subwoofer Output terminal on your subwoofer to the WAVES" or "Surround Sound" input on your soundbar.
Troubleshooting
- Power won’t turn on: Check that the power cord is properly plugged into a power outlet and that the Subwoofer Output terminal on your soundbar is set to "Passive" or "P".
- Connection is not stable: Check that the connection between the Subwoofer Output terminal on your subwoofer and the R-Sub Out or "Sub Out" terminal on your soundbar is stable and not damaged.
- Subwoofer not responding: Check that the Subwoofer Output terminal on your soundbar is set to "Passive" or "P" and that the Subwoofer Output terminal on your subwoofer is connected to the correct input.
Conclusion
Linking your Sony subwoofer to your soundbar is a simple process that can enhance your home theater experience. By following these steps and tips, you should be able to connect your subwoofer to your soundbar and enjoy a richer and more immersive audio experience.