How to Do the Speed Glitch in Skate 3?
The speed glitch in Skate 3 is a complex and highly sought-after trick that requires a combination of skill, practice, and patience. It’s a trick that involves the player performing a backflip into a flipper grab, while the player’s character is in motion, adding an extra layer of difficulty to the trick. In this article, we’ll take you through the step-by-step guide on how to do the speed glitch in Skate 3.
Step 1: Pre-requisites
Before attempting the speed glitch, you need to have a good grasp of the basic skills required, including the ability to perform a backflip, a flipper grab, and decent speed on the board. You should also have a good understanding of the game’s physics and motion.
| Skill Level | Requisite |
|---|---|
| Intermediate | Basic backflip, flipper grab |
| Advanced | Speed on the board, basic flying skills |
Step 2: Setting Up the Board
To attempt the speed glitch, you need to set up the board to match the required speed and distance. Use the speed up function (button F) to increase your speed.
| Speed Function | Recommended Speed |
|---|---|
| 1 | Low speed ( -0.5 – 0.2) |
| 2 | Medium speed (0 – 1) |
| 3 | High speed (1.5 – 2.5) |
Step 3: Launching the Glitch
To perform the speed glitch, you need to launch the board into the air, while maintaining control of your speed and attitude. Use the right mouse button (RMB) to launch the board.
| Right Mouse Button | Recommended Launch Technique |
|---|---|
| 1 | Minimal initial speed, slight rotation |
| 2 | Moderate initial speed, slight rotation |
| 3 | High initial speed, minimal rotation |
Step 4: Flipping and Grabbing
As the board reaches the desired speed, you need to flip the board upwards to initiate the speed glitch. Use the RMB to flip the board.
| RMB Flipping | Recommended Technique |
|---|---|
| 1 | Minimal flip, slight rotation |
| 2 | Moderate flip, slight rotation |
| 3 | High flip, minimal rotation |
Step 5: Rotating and Catching
After flipping the board, you need to rotate the board while maintaining speed to catch the flipper grab. Use the RMB to rotate the board.
| RMB Rotation | Recommended Technique |
|---|---|
| 1 | Minimal rotation, slight speed |
| 2 | Moderate rotation, slight speed |
| 3 | High rotation, minimal speed |
Step 6: Catching the Grab
As the board reaches the desired speed and rotation, you need to catch the flipper grab by rotating the board further. Use the RMB to catch the grab.
| RMB Catching | Recommended Technique |
|---|---|
| 1 | Minimal rotation, slight speed |
| 2 | Moderate rotation, slight speed |
| 3 | High rotation, minimal speed |
Practice and Patience
The speed glitch in Skate 3 is not an easy trick to master. Practice the entire sequence in the test mode to develop muscle memory and improve your skills. Increase your speed and rotation as you progress.
| Practice Progression | Recommended Increase |
|---|---|
| 1 | Minimal increase (1.5 – 2.5) |
| 2 | Moderate increase (2.5 – 3.5) |
| 3 | High increase (3.5 – 5.0) |
Conclusion
The speed glitch in Skate 3 is a challenging trick that requires skill, practice, and patience. Remember to always practice safely and within your limits. By following these steps and practicing the entire sequence, you’ll be able to master the speed glitch in no time.
| Additional Tips | Recommended |
|---|---|
| Use the right controller settings (e.g., D-pad sensitivity, game speed) | Customize your controller settings |
| Keep your rotation consistent | Maintain consistent rotation |
| Use the speed control button (button F) to increase or decrease your speed | Use the speed control button to adjust speed |